Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Windows & Doors in Miami, FL | TruePane Windows & Doors
We service and rebuild Therma-Tru entry and patio door systems across Miami as an independent trade shop, not a factory-authorized dealer. What separates our Therma-Tru work here from everywhere else in the country is Miami-Dade’s High Velocity Hurricane Zone code. Every Therma-Tru door we touch in Miami gets NOA-mapped anchoring, not the wood-frame installation a Broward County contractor would reach for by habit. Call (561) 956-2754 and we’ll walk you through exactly what your door needs.
Why Miami Residents Choose Us for Therma-Tru Service
Therma-Tru builds a solid fiberglass slab. We’ve been rebuilding, resealing, and reinstalling them across Miami’s CBS-block homes since before the county’s product-approval registry tightened after Hurricane Andrew. Dale Kessler grew up in his father’s glazing shop in Columbus, Ohio, learned the trade at Columbus State, and has spent the last decade-plus working Miami’s mix of Coral Gables bungalows and high-rises overlooking Biscayne Bay. We know which Therma-Tru lines hold up on a salt-air east-facing entry and which ones need a hinge-jamb rebuild after a few hurricane seasons. Our service vans carry OEM Therma-Tru corner pads, sweeps, weatherstrip, and hinge rebuild kits, so most jobs are done in one visit. If the pane is not true, the job is not done.
Common Therma-Tru Windows & Doors Problems We Solve in Miami
- Hinge-side rot at the bottom corner of Classic-Craft and Smooth-Star slabs. Wind-driven rain pools against the sill on east-facing entries near Biscayne Bay, and the bottom corner of the jamb is where the water sits. We strip the cladding, rebuild with OEM composite, and fix the drainage so it doesn’t come back.
- Fiberglass skin delamination at the bottom rail. Salt-laden air here wicks into micro-cracks and attacks the wood-grain layer underneath. Therma-Tru’s finish is good, but Miami’s coastal exposure finds every pinhole. On doors younger than eight years we repair. Older than twelve, we usually talk replacement.
- Multi-point lock and astragal misalignment after storm-pressure cycling. Miami’s hurricane season flexes a door slab, and the active panel falls out of square. The deadbolt binds, the top shoot bolt seizes, and then a homeowner is locked out of a perfectly good door. We realign the astragal, reset the lock body, and square the slab.
- Sill pan gasket compression set from sun and heat. Miami’s summer sun and 40-plus inches of rain in the wet months bake the threshold gasket until it won’t spring back. Water wicks under the threshold and into the subfloor. We replace the gasket with marine-grade material and check the sill pan for proper slope.
- Corroded frame anchors on pre-1992 CBS homes. The original door was often set with whatever was cheap in 1985, and thirty years of Miami’s salt air hasn’t been kind. We pull the old anchors, weld in galvanized tabs per the NOA fastening schedule, and re-set the door square.
Therma-Tru Service in Miami: What Local Conditions Mean for Your Equipment
Only Miami-Dade enforces the HVHZ requirement that every Therma-Tru door and Impact Windows in Miami installed in a pre-1992 CBS home must be anchored into concrete with an engineering-approved buck or direct-set method accepted under the county’s NOA. A contractor from Broward or Palm Beach cannot legally pull a permit here without revalidating the product’s approval. We see this play out in neighborhoods like Allapattah and West Little Havana, where the original rough opening often has no treated buck at all, and the hinge-side jamb has pulled away from the block. Our crew rebuilt a pair of warped Therma-Tru Traditions outswing doors on a 1989 CBS ranch in Allapattah exactly like that. We stripped the aluminum cladding, welded galvanized anchor tabs to the frame per the NOA fastening schedule, rebuilt both bottom rails with OEM composite, and reinstalled with stainless steel hinges. Then we filled out the OIR-B1-1802 wind mitigation form so the homeowner could renew with Citizens and drop the premium by 33 percent. If it’s not worth putting in the contract, it’s not worth saying out loud.
Therma-Tru Models & Products We Service in Miami
We work on every Therma-Tru line commonly installed in Miami: the Classic-Craft Mahogany Collection, the Pulse Series, the Traditions Series, and the Smooth-Star Series. For hardware, we keep OEM Therma-Tru corner pads, sweeps, weatherstrip, and hinge rebuild kits stocked in our Miami service vans. When original finishes have corroded, we use marine-grade stainless steel or powder-coated aftermarket hardware; that’s the right call on Biscayne Bay exposures. For systems older than twelve years with bottom-rail delamination or rusted frame anchors, we’ll tell you straight: a full NOA-compliant replacement costs less over time than piecemeal patching. We also handle full frame replacement and hurricane impact windows alongside our Therma-Tru entry door work, all under the same Therma-Tru sales & service roof.
Therma-Tru Service Pricing in Miami
Most Therma-Tru service in Miami falls between $180 and $340 when the repair is contained to hardware, weatherstrip, or a single hinge rebuild. Multi-point lock realignment with astragal adjustment typically runs $250 to $475, depending on how far the active panel has drifted. Full bottom-rail delamination repair with OEM composite and marine-grade finish starts around $600 and goes up from there if frame anchors need rebuilding. What drives cost more than anything in Miami is whether the slab is still salvageable and whether the original install had a proper buck. We give written line-item quotes before any work starts, and the estimate is free. Call (561) 956-2754 and we’ll measure it, quote it, and register both warranty layers in writing before the truck leaves your driveway.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Therma-Tru Windows & Doors in Miami
Yes. Every exterior door and window in Miami-Dade must carry a Notice of Acceptance from the county’s product-approval registry, regardless of brand. A Therma-Tru door that’s not NOA-listed will fail a wind-mitigation inspection, and the homeowner won’t get the Citizens premium discount they’re entitled to. We verify the NOA before we touch the door. Call (561) 956-2754 if you have an inspection coming up and need it sorted.
Salt. The bay side of Miami pushes salt-laden air into every micro-crack in the fiberglass skin and every hinge pin it can reach. Kendall sits inland, with less salt and less wind-driven rain, so the same Therma-Tru Smooth-Star slab lasts longer there. We swap corroded hardware for marine-grade stainless steel on bay-side units as a matter of course. Call (561) 956-2754 for a quote.
Sometimes. It depends on the condition of the original buck and whether the NOA fastening schedule can be met with the existing anchor points. Allapattah and West Little Havana homes often have no treated buck at all, which means we’re welding galvanized tabs to the frame and direct-setting into the block. We’ll tell you exactly what your opening needs during the free estimate. Call (561) 956-2754.
Usually an installation problem, not a factory defect. Storm-pressure cycling flexes the slab, and if the original install didn’t square the frame properly, the multi-point lock falls out of alignment. Therma-Tru’s hardware is solid; the binding is the slab telling you the frame moved. We realign the astragal, reset the lock body, and square the active panel. Most of these are single-visit fixes. Call (561) 956-2754 and we’ll get it done.
Yes, in most cases. A fully NOA-compliant impact-rated opening throughout a pre-Andrew CBS home can cut annual premiums by 20 to 45 percent, depending on the rest of the house. The key is the OIR-B1-1802 wind mitigation form, which has to be filled out correctly and submitted with the installation paperwork. We walk every customer through that form alongside the Miami Window Installation proposal so the discount actually gets applied. Call (561) 956-2754 to schedule your free estimate and we’ll show you the numbers on paper.
Service Areas Near Miami
We run Therma-Tru service calls throughout Miami service area and into the surrounding communities, including Therma-Tru service in Hialeah with its dense pre-1992 CBS housing stock, Therma-Tru service in Miami Beach where salt corrosion is at its worst, plus Coral Gables, Doral, and Miami Gardens.
Book Your Therma-Tru Service in Miami Today
If your Therma-Tru door is binding, leaking, or showing delamination, don’t wait for the next storm to find the weak spot. Call (561) 956-2754 now and we’ll set up your free estimate. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.