Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTrusted Shingle, Tile & Metal Roofing for Miami Homeowners
Shingle, Tile & Metal Roofing - Miami is not a one-size-fits-all decision. The salt air, hurricane season, and relentless sun mean your roof has to work harder here than almost anywhere else in the country. TruePane Windows & Doors has served Miami-area homeowners for over 42 years, and while our name says windows and doors, our exterior crew knows roofing materials and storm-rated assemblies as well as any glazier knows glass. If your roof is leaking, lifting, or simply at the end of its useful life, call (561) 956-2754 and a live person will answer. That is not a call center promise. It is how we have always worked.
What Our Shingle, Tile & Metal Roofing Service Includes
We inspect, repair, and replace the three roofing systems Miami homeowners rely on most. Each one has different failure patterns, different code requirements in Miami-Dade, and different expectations for lifespan. Here is what we actually do under each roof type.
Shingle Roofing
Shingle roofs are the most common residential roof in Miami, and also the one we see fail earliest when installation was rushed or ventilation was ignored. Asphalt shingles in South Florida take a beating from UV exposure, and the granules that protect the asphalt wash away faster along the coast. We inspect for granule loss, nail pops, lifted tabs, and flashing failures around penetrations. When we replace a shingle roof in Miami, we insist on proper underlayment, new flashings, and adequate attic ventilation because shingles that bake from below fail years before they should.
Tile Roofing
Clay and concrete tile roofs define the look of Miami neighborhoods from Coral Gables to Kendall. Tile is durable, but it is not indestructible. Foot traffic during repairs, hurricane debris, and poor original installation crack tiles and break the underlayment beneath them. We walk tile roofs carefully and repair them the way the material demands, replacing broken tiles with matched profiles and resecuring loose tiles before they become airborne in a storm. In Miami, a loose tile is not just a cosmetic problem. It is a missile in 90 mph winds.
Metal Roofing
Metal roofing in Miami makes sense for homeowners who want decades of service with minimal maintenance. Standing seam and metal panel systems shed water quickly, hold up to high winds when installed to Miami-Dade product approval standards, and reflect more heat than asphalt. We service and install metal roofs with attention to flashing details at eaves, ridges, and penetrations. The roof only performs as well as its weakest seam. We also check for galvanic corrosion where dissimilar metals meet, because salt air accelerates that reaction along Miami’s coastal corridor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Shingle, Tile & Metal Roofing
We work on the roofing systems Miami homeowners actually have. That includes major manufacturers like PGT and CGI on the storm-rated side, because so many Miami homes combine impact-rated doors and windows with a roofing system that must meet the same wind code. We understand how PGT and CGI assemblies integrate with rooflines, flashing, and opening protection, and we service them with the same care we bring to every exterior component.
On the roofing material side, we service a wide range of shingle, tile, and metal systems. We have repaired and replaced Owens Corning, GAF, and CertainTeed shingle lines, Boral and Eagle tile profiles, and standing seam systems from multiple manufacturers. We also work with ViewLux products where skylights and roof glazing are part of the assembly. Whether your roof carries a recognizable brand name or a builder-grade line from twenty years ago, we can assess it, quote it, and fix it.
Signs You Need Shingle, Tile & Metal Roofing Right Now
- Granules in your gutters or at downspout outlets. Asphalt shingles shed granules as they age, and heavy granule loss means the protective layer is failing. In Miami’s UV, a shingle roof with bare patches is months away from a leak, not years.
- Water stains on ceilings or walls after a heavy rain. A roof leak does not always show up directly under the breach. Water travels along trusses and sheathing before it finds a path down. By the time you see the stain, the leak has been active for a while.
- Cracked, chipped, or missing tiles visible from the ground. A single broken tile exposes the underlayment to water and sun. In Miami’s rainy season, that exposure quickly turns into a much larger repair. Walk your roofline visually after any wind event.
- Rust streaks or corrosion on a metal roof, especially near fasteners or edges. Salt air in Miami accelerates corrosion, and rust at the fastener line means the panel is no longer fully secured. This is a failure point that gets worse in the next storm.
- Daylight visible in the attic through the roof deck. If you can see light through the roof boards, water can get in. This also means your roof decking may be compromised and needs evaluation before any overlay or replacement.
Our Shingle, Tile & Metal Roofing Process - Step by Step
- 1
Inspection and documentation. We start with a full visual inspection of the roof surface, flashings, penetrations, and attic ventilation where accessible. We photograph everything so you see what we see before anyone discusses price.
- 2
Written assessment with clear findings. You get a written summary covering what is failing, what is serviceable, and what has remaining life. No verbal handshakes. We put it on paper because a roof decision in Miami is a big-ticket decision.
- 3
Line-item estimate, not a lump sum. Every repair or replacement gets quoted line by line so you can see exactly what you are paying for. This is the same square-deal pricing TruePane has used for decades on windows and doors, applied to roofing.
- 4
The work itself. Our crew arrives on time, in uniform, background-checked. We protect landscaping, keep the site clean, and complete the work without leaving loose materials behind. Most repairs are finished in a single visit.
- 5
Final walkthrough and written warranty confirmation. Before we leave, we walk the roof or the repaired area with you and confirm what was done. Any warranty coverage is stated in writing, with durations listed, the same way we register window and door warranties under The Keystone Standard.
How Much Does Shingle, Tile & Metal Roofing Cost in Miami?
A shingle roof replacement in Miami Beach and the surrounding area typically runs between $6.50 and $9.50 per square foot for architectural shingles, depending on roof complexity, tear-off requirements, and underlayment choices. Tile roof repairs generally run $350 to $900 for isolated tile replacement and flashing fixes, while full tile replacement can range from $12 to $22 per square foot. Metal roofing replacement on a typical Miami home runs $10 to $18 per square foot for standing seam systems, with premium coated products at the higher end. These are ballpark ranges based on recent Miami-area work, not a substitute for a measured, written quote.
What affects the price: roof pitch, number of stories, existing deck condition, whether the old roof must be torn off, and whether the assembly must meet current Miami-Dade wind code. The best way to avoid overpaying is to get a line-item quote that separates material from labor and shows exactly what is included. Our free estimates are written and itemized, with no hidden line items and no change orders unless you approve a legitimate scope change in advance. Call (561) 956-2754 to schedule one.
Shingle, Tile & Metal Roofing Near Miami - Our Service Area
We serve Miami and the surrounding communities including Hialeah, Miami Beach, Coral Gables, Doral, Kendall, Cutler Bay, Palmetto Bay, and Homestead. Most inspections and repairs are scheduled within one to three business days, and a live person answers the phone around the clock if you need to talk through what you are seeing. For more on the specifics of roofing work in nearby areas, see our pages on Shingle, Tile & Metal Roofing in Hialeah and Shingle, Tile & Metal Roofing in Miami Beach.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Shingle, Tile & Metal Roofing in Miami
These are the three roofing systems most commonly installed on Miami homes. Shingle roofing uses asphalt shingles layered over an underlayment on a wood deck. Tile roofing uses clay or concrete tiles that interlock and lay over an underlayment system. Metal roofing uses standing seam or panel systems that shed water quickly and resist wind uplift. Each system has distinct code requirements in Miami-Dade County, and each requires a different repair approach when it fails.
Most repair work is completed in a single visit, with smaller jobs like tile replacement or flashing repair done in a few hours. A full shingle tear-off and replacement typically takes two to five days depending on roof size and pitch. Tile and metal replacements run longer because of material weight, fastening requirements, and the need for accurate flashing detail work. We give you a written timeline before the job starts and we keep to it.
For homeowners in our Shingle, Tile & Metal Roofing in Hialeah service area, repairs often start around $350 and run up to $1,500 or more depending on what is failing. Full replacements range from $6.50 to $22 per square foot depending on roof type, with metal and tile at the higher end. The only way to know your number is with measurements and a written itemized quote. Call (561) 956-2754 for a free estimate that shows every line item.
Yes. We work on the storm-rated assemblies from PGT and CGI that are common on Miami homes, including roof-adjacent impact windows, skylights, and integration points between roofing and opening protection. We also service ViewLux skylight products where roof glazing is involved. The same standard applies: measure twice, quote on paper, register every warranty in writing.
A live person answers our phone 24 hours a day, 7 days a week, including the morning after a storm when half of Miami is looking for a tarp. We respond to active leaks and storm damage with temporary protection when possible and schedule the permanent fix as quickly as crew availability allows. If water is coming in, call (561) 956-2754 right away, even if it is late.
Every job we complete carries the 90-Day Done Right Promise. If something is not done right, we make it right with no paperwork fights and no arguing. Manufacturer warranties on materials are registered in writing, with durations stated, before the crew leaves your driveway. This is the Keystone Standard TruePane has applied to every window and door install, applied to roofing with the same discipline.
Make sure the roof and attic access are clear if we need to inspect from the inside. Move vehicles out of the driveway or away from the work area so materials and ladders can be placed safely. If you have pets, keep them inside during the work. We handle the rest: protecting landscaping, cleaning up, and leaving the property the way we found it.
Schedule Your Shingle, Tile & Metal Roofing Service in Miami Today
Your roof is not a project to delay in Miami’s climate. Call (561) 956-2754 for a free, written, itemized estimate on shingle, tile, or metal roofing work. A live person answers, every time, day or night. We will assess what you have, tell you straight what it needs, and give you a square-deal price before any work begins. Dale Kessler built TruePane on a simple rule: if the pane is not true, the job is not done. That rule governs every roof we touch.
Written by the team at TruePane Windows & Doors, serving Miami, FL since 2008 with a 42-year community heritage.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.