Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Sliding Glass & Patio Doors in Miami: What to Know First
We repair and replace CGI sliding glass doors and patio doors throughout Miami as an independent CGI service provider, and most jobs are completed in a single visit. A typical roller or track repair on a CGI slider runs $185 to $420, while full door replacements land between $2,800 and $9,500 depending on the series and glass package. If you own a CGI door in Miami, you already know the brand’s reputation for impact performance. What you may not know is that even the best-built door has predictable wear points, and we know exactly where to look. Call (561) 956-2754 and a live person will answer, not a voicemail tree.
How CGI Products Fail - and How We Fix Them
Every brand has a personality, and CGI doors tend to fail in ways we can predict before we even arrive. Here’s what we see across Miami, from Coral Gables to Kendall to the Beaches:
- Roller bearing seizure on the Estate Collection. CGI’s heavier impact-rated panels ride on steel rollers that, after ten or twelve years of Miami humidity and salt air, begin to bind and flatten. The symptom is a door that suddenly needs two hands and a hip to move. We replace the roller assemblies with OEM parts and re-align the panel so it glides on the original track without dragging.
- Top-hung panel sag on the Quantum series. On wide three-panel configurations, the weight of the impact glass eventually pulls the upper carriage out of square. You’ll notice the door wants to jump the track when it’s about three-quarters open. The fix is not adjusting a screw. We pull the panel, re-set the carriage geometry, and verify the reveal is even top to bottom before we call it done.
- Weep-hole clogging and channel rot on wood-framed CGI patio doors. Miami storms deliver horizontal rain that overwhelms the weep system if it hasn’t been kept clear. We see this on older Estate and Classic wood patio doors where standing water sat long enough to soften the bottom rail. We clear the channels, repair or replace the damaged rail section, and confirm drainage actually drains before reinstalling the panel.
- Latch misalignment after foundation settling on CGI sliding doors installed in older Miami homes. Coral Gables and Coconut Grove homes on lime-rock soil shift over decades. A strike plate that’s off by an eighth of an inch will make the door feel like it’s fighting you even when the rollers are fine. We re-shim the frame or machine the plate to restore a clean, two-point latching action, then drill-test the lock throw at no extra charge.
- Seal failure at the interlock where the two panels meet. On CGI’s multi-panel patio doors, the interlocking stiles carry a compression gasket that degrades with UV exposure. You’ll feel a draft at the center seam, or see condensation between panels on cooler Miami mornings. We replace the interlock weatherstripping with a material matched to the original profile, then test under shop-fan negative pressure to confirm the seal holds.
Our CGI Sliding Glass & Patio Doors Process
Here’s what happens when you call us about a CGI door that’s giving you trouble:
- 1
You talk to a person. Not a call center, not a form. We ask questions about your door’s symptoms and the CGI series label on the edge of the panel while you’re standing there.
- 2
We measure and diagnose on site. A uniformed, background-checked tech arrives on time, removes the access caps, inspects the rollers, track, lock, and weatherstripping, and writes down what’s actually wrong versus what’s just worn.
- 3
You get a written line-item quote. We price OEM parts and quality aftermarket options side by side on paper, so you see the trade-off, not a mystery number. No surprise line items. Ever.
- 4
We do the work in one visit when possible. Most CGI slider repairs are done the same day. For full replacements, we order the panel with the exact glass package and frame finish, then come back when it’s ready and set it in one day.
- 5
We test the door the way you’ll use it. Twenty open-and-close cycles, lock throw check, water weep check, and a level read on the track. If the pane isn’t true, the job isn’t done.
- 6
You get The Keystone Standard in writing. Both manufacturer warranty layers registered, durations stated, and our 90-Day Done Right Promise confirmed before the truck leaves your driveway.
What CGI Sliding Glass & Patio Doors Cost in Miami
Here are the numbers we see regularly across Miami, based on actual jobs we’ve completed:
- Roller assembly replacement (per panel): $185-$320
- Track repair or section replacement: $240-$480
- Latch and lock alignment or replacement: $145-$310
- Weatherstripping replacement (interlock and perimeter): $180-$395
- Full CGI sliding glass door replacement: $2,800-$9,500 depending on series, size, and impact glass package
What moves the price is the series you own and whether your glass is the standard laminate or a higher-spec impact package. A three-panel Quantum door with low-E glass will never cost what a two-panel Estate costs. If the original frame is square and solid, repair is almost always cheaper than replacement, and we won’t push you into a new door when your existing one has ten good years left. That’s a square deal. Call (561) 956-2754 and we’ll quote it accurately from the first visit. Estimates are free.
Why Miami Homeowners Call TruePane Windows & Doors for CGI Work
We’ve served Miami for over a decade under Dale Kessler, but our shop tradition goes back forty-two years to a two-bay garage in Columbus, Ohio, where Dale’s father taught him that a window or door either works right or it doesn’t. We’re not a franchise crew cycling through subs. Our technicians are background-checked, uniformed, and trained in-house. When we work on your CGI door, we’re also the same crew that handles PGT, CWS, ES Windows, and ECO Window Systems, so if the fix involves a neighboring panel or a mixed-brand home, we see the whole picture. Every job carries our 90-Day Done Right Promise. If it’s not done right, we make it right, no paperwork, no arguing. And when you call our number, a live person picks up, 24 hours a day. We’ll be there when we say. If it’s not worth putting in the contract, it’s not worth saying out loud.
FAQs
No, not when the repair is done correctly with parts matched to the original specs. As an independent CGI service provider, we don’t have an affiliation with CGI, and we don’t claim one. What we do is use OEM or spec-matched components and document every repair so your manufacturer coverage stays intact. We register warranty layers in writing for every replacement job, and if a repair falls under manufacturer coverage, we’ll tell you so before any work begins. Call (561) 956-2754 to check your door’s warranty status and repair options.
In Miami’s humidity and salt air, a well-maintained CGI slider typically lasts 20 to 30 years on the frame, with rollers and weatherstripping needing service every 8 to 12 years, depending on exposure. Homes right on Biscayne Bay or within a block of the ocean cycle through hardware faster because of airborne salt. The good news is that CGI’s aluminum frames are built for exactly this climate. The replaceable components are the moving parts, not the structure.
Yes. CGI’s standard frame finishes, including white, bronze, and the sand and gray family, are matched at the manufacturer level or through a certified finisher, depending on the age and series of your door. We take a color reading and match the finish before ordering a replacement panel, so you don’t end up with a two-tone slider facing the pool.
Yes, we replace and repair CGI sliding glass and patio doors in high-rise buildings throughout the Miami metro, including Brickell, Edgewater, and Sunny Isles. We coordinate with building management for loading dock access, service elevator booking, and any engineer requirements before the work day. The job is planned so we arrive, work, and clear the unit in a single visit.
For urgent jobs like a door that won’t close or a lock that won’t throw, we typically schedule an initial visit within one to two business days. Parts then determine the completion timeline. OEM CGI hardware is generally available within three to ten business days, and we’ll tell you the real lead time when we quote, not an optimistic guess. Call (561) 956-2754 and a live person will give you an honest answer.
If your CGI door is sticking, dragging, leaking, or worn out, call us at (561) 956-2754 and we’ll schedule a free estimate. A live person answers every call, 24 hours a day, and we’ll tell you plainly what the door needs and what it’ll cost. We stand behind it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.