Entry Doors

Entry Doors in Miami, FL | TruePane Windows & Doors

Entry doors in Miami carry a double load. They have to look like the first thing guests notice, and they have to hold up as the last line between your front hallway and a hurricane. That’s the product we sell at TruePane Windows & Doors: Therma-Tru fiberglass and steel entry door systems with real impact ratings, real curb appeal, and finishes that don’t fade after two summers of salt air. We install them across Miami, from Coconut Grove to Kendall to Pinecrest, and we do it to the same standards we’d want on our own front doors: level, plumb, square, and sealed like it matters. Call (561) 956-2754 to talk specs or schedule a free measurement.

Call (561) 956-2754

Product Overview - Entry Doors

When Miami homeowners start shopping entry doors, they usually want three things that don’t always play well together: something beautiful, something that won’t warp in humidity, and something that will actually pass a Miami-Dade permit review. That’s the gap these doors fill. The fiberglass and steel lines from Therma-Tru are built around the idea that you shouldn’t have to choose between a door that looks handcrafted and one that meets High-Velocity Hurricane Zone requirements.

Fiberglass is the default choice for most of our Miami installs. It holds its shape in the wet season, it doesn’t rust at the threshold like steel can near the coast, and the paintable woodgrain option gives you the texture of a solid oak door without the swelling. Steel is the quieter of the two, and it’s what we recommend when someone wants maximum forced-entry resistance along with the impact rating. Both come up to 48 inches wide, which covers most single entry configurations in the area, from 1930s Coral Gables originals to new build in Doral.

You can get these doors as a solid panel, or with a decorative impact glass insert, or with Low-E insulated glass. That means the same door system works for a shaded courtyard entry in Shenandoah or a west-facing, full-sun front door in Westchester. Factory-finished options in white, black, and bronze ship ready to hang. Paintable woodgrain is for the homeowner who wants to match a specific trim color or create something custom.

We sell the door, but we really sell the installation. A rated door in a bad frame is a rated door that fails. We’re a Florida hurricane-impact window and door company, and we install every entry door with the same care we’d give a 20-foot sliding door on a waterfront lot. Call (561) 956-2754 if you want to walk through the options in person.

Technical Specifications

• Frame materials: Fiberglass, Steel
• Maximum size: Up to 48″ wide
• Glass options: Decorative Impact Glass Insert, Low-E Insulated Glass Insert, No Glass (Solid Panel)
• Color/finish options: White, Black, Bronze, Paintable Woodgrain Finish
• Design pressure: Matched to your wind zone, up to +/-100 - never higher
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration
• Code engineering: Built to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements

These are the numbers that matter when you’re pulling a permit in Miami. We’ll give you the exact NOA or Florida Product Approval number that corresponds to the door configuration you choose, in the exact size, with the exact glass. We don’t hand over a generic approval sheet and hope it matches your opening.

Hurricane & Compliance Performance

Laminated Impact Glass - Every glass option on these entry doors, whether it’s the decorative insert or the Low-E insulated insert, uses laminated glass with a PVB interlayer. When a piece of debris hits the glass, that interlayer holds the broken shards in the frame. The glass cracks, but it doesn’t open a hole in your house. In Miami, that’s the difference between a cosmetic repair and a flooded living room.

Miami-Dade NOA / Florida Product Approval - Each door configuration carries its own Notice of Acceptance and Florida Product Approval documentation. The numbers are issued per configuration, which means the exact size, glass, and finish combination you pick has its own approval path. We verify those numbers on your specific quote, so your permit application isn’t a guessing game.

FBC / HVHZ Compliance - Florida’s High-Velocity Hurricane Zone is a different code animal than the rest of the country, and Miami is the place that writes the rulebook. These entry doors are engineered to FBC HVHZ requirements from the start, not adapted to them after the fact. That’s a structural difference, not a paperwork difference.

TAS 201 / TAS 202 / TAS 203 Testing Context - The protocol family these doors are designed around is what Miami-Dade uses to decide whether a product actually works. TAS 201 covers large-missile impact; TAS 202 covers cyclic wind-pressure loading, which is the repeated slamming force a hurricane puts on a door for hours; TAS 203 covers forced-entry resistance. A door that passes all three isn’t hypothetically strong. It’s tested.

Design Pressure for Your Wind Zone - Here’s where we get specific, because this number matters more than any generic marketing claim. These doors carry design pressures matched to your wind zone, up to +/-100, and never higher. We don’t oversell a rating and we don’t undersell the site. If your front door faces a courtyard in a protected pocket of Miami, you may not need the full rating. If you’re on an exposed corner lot near the bay, you do. We match the product to the calculation, not the other way around.

Energy Performance Options - The Low-E insulated glass insert is available for anyone who wants the entry door to pull double duty as an efficiency upgrade. It cuts heat transfer at the front threshold, which matters when your entry faces west or gets direct afternoon sun. Solid panel and decorative impact glass options are also available for homeowners who want the impact protection without the added glass layer.

Color & Glass Options

The finish options map to the two big architectural styles you see all over Miami. White doors fit the clean coastal lines in places like Coconut Grove and Key Biscayne, where bright stucco and white trim read as classic. Black doors work on modern builds in the Design District and Midtown, where a dark front door against a light facade creates instant contrast. Bronze is the one that ages gracefully with terracotta tile and Mediterranean ironwork, and it’s a favorite in Coral Gables and older Morningside homes.

The paintable woodgrain fiberglass finish is worth a longer look if you’re matching an existing trim or trying to blend a new door with a historic property. It takes paint like wood, shows grain like wood, and doesn’t swell or rot the way wood does after a few humid Miami summers. You’re not locked into the factory finish; you get wood texture with a fiberglass core.

Glass is a first impression decision. The decorative impact glass insert adds light and pattern to a covered entry without sacrificing the rating. The Low-E insulated option is the practical pick when your front door faces sun. And the solid panel is the strongest, quietest, most private arrangement, which suits Miami homeowners who want a front door that reads as a statement wall rather than a window.

Installation by TruePane Windows & Doors in Miami

We handle installation the way the code expects: as part of the product’s performance, not an afterthought. A Miami-Dade NOA-rated entry door installed with the wrong fasteners, or the wrong sealant, or a frame sitting three degrees out of level, does not perform to its rating. The approval number means the door system passed as a system. The install is what delivers that system to your wall.

Our process starts with a pre-install inspection. We measure the opening, check the rough frame for square, and look at what’s already there: rotted jambs, previous caulk buildup, rusted threshold pans. We don’t set a door over a failing frame. If the rough opening needs correction, we say so before we order anything.

When we set the door, we set it level, plumb, and square, and we shim the jambs correctly so the lockset and deadbolt engage without fighting the frame. We follow AAMA 2400 and 2410 installation practice for the perimeter, and use AAMA 812 low-expansion foam at the perimeter seal. That’s the detail that keeps Miami’s wind-driven rain from finding the gap between your door frame and the rough opening. Then we do a final water test on the threshold and sill pan before we call it done.

In Miami specifically, we’re working in HVHZ jurisdictions, which means the permit office is going to ask for product approval documentation. We know what they want, and we provide it. If your home is on a coastal exposure in Biscayne Point or North Bay Village, the design pressure requirement goes up, and we’ll size the door to that zone. If you’re inland in Kendall or Palmetto Bay, the calculation changes. That’s how it should work.

Improper installation compromises the NOA-rated system. We’ve torn out doors in Miami that were installed by a general handyman with a level from the dollar store and silicone from a tube that expired in 2019. The door itself was fine. The install wasn’t. That’s the argument for having a company that does this every week, instead of someone who does it between bathroom remodels.

Frequently Asked Questions - Entry Doors

What wind zone / design pressure is the Entry Doors rated for?
These entry doors carry design pressures matched to your wind zone, up to +/-100, and never higher. The exact rating for your install depends on your Miami location, the door size, and the glass configuration. We’ll verify the design pressure on your quote before you order. Call (561) 956-2754 to get a site-specific number.

What is the lead time?
Lead time depends on the door configuration, finish, and whether any glass inserts are custom-cut. Factory-finished standard configurations move faster; custom sizes or paint-grade finishes take longer. We’ll give you a window when we give you the quote, and we’ll set expectations honestly. Call (561) 956-2754 with your size to narrow it down.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes, in most Miami-Dade and HVHZ municipalities your permit application will need the product approval documentation specific to your door configuration. We provide the NOA or Florida Product Approval number that corresponds to the exact door you order. No generic paperwork. Call (561) 956-2754 and we’ll walk you through the submittal.

Can I customize the size or configuration?
The doors are available up to 48 inches wide, and custom sizes below that are workable on most lines. You can choose the frame material, glass option, finish, and hardware prep. Configuration changes affect the approval documentation, so we’ll make sure your custom choices still carry a valid NOA. Call (561) 956-2754 with your opening dimensions.

How do I maintain the frame?
Fiberglass frames need a wash with mild soap and water a couple times a year, and a check on the threshold seal and weatherstripping before hurricane season. Steel frames benefit from a quick inspection for scratches or chips, since any exposed metal near salt air can start rusting. Touch-up paint or a quality sealant handles it. Call (561) 956-2754 if you notice anything that doesn’t look right.

Get a Quote - Entry Doors in Miami

We measure, we spec, we install, and we stand behind the work. If you’re ready to replace your front door, or even just starting to price it out, call TruePane Windows & Doors at (561) 956-2754. We’ll schedule a free on-site measurement in Miami, walk you through the options that fit your opening and your wind zone, and get you a quote with real approval numbers, not guesswork.

Written by the team at TruePane Windows & Doors, serving Miami since 2013.