Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFrench & Double Doors in Miami, FL | TruePane Windows & Doors
French and double doors give a Miami home something a single door can’t: wide, symmetrical openings that connect interior rooms to patios, balconies, and pool decks without sacrificing hurricane protection. At TruePane Windows & Doors, we supply and install paired impact-rated French doors with laminated glass in every lite, so both panels carry the same protection rating as the rest of your opening. We’ve been fitting these systems in Miami since our first installation, and we install per AAMA 2400/2410 practice with HVHZ-compliant methods, level, plumb, and square every time. Call (561) 956-2754 to talk through a project or schedule a free measurement.
Product Overview - French & Double Doors
French and double doors are the go-to choice when a Miami homeowner wants a wide interior-to-exterior opening that still reads as a design statement. Paired impact-rated French doors with laminated glass in every lite deliver symmetrical sightlines and multi-point locking hardware, so the doors look balanced from both inside and out while locking securely at the head and sill.
In hurricane-prone construction, this profile earns its place because the laminated glass doesn’t shatter into the room on impact. The PVB interlayer holds the glass in the frame, which is the entire point of an impact door in a High-Velocity Hurricane Zone like Miami-Dade. We sell this product across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so the frame material, finish, and hardware configuration can be matched to the architecture rather than forced onto it.
What makes these doors particularly useful in South Florida is how they handle daily life. They’re the door you leave slightly open on a January evening, the one that lets light into a dining room, and the one that stays sealed tight when an August feeder band rolls through. The frame engineering supports both roles: everyday access and storm-season protection.
Technical Specifications
- Frame materials: Aluminum or vinyl, depending on the line and the exposure of the opening.
- Maximum size: Up to 96″ wide across the paired panel system.
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, and clear glass.
- Finish options: White, almond, bronze, black, and tan.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration.
- Design pressure: Matched to your wind zone, up to +/-100. Never higher than the opening actually requires.
- Hardware: Multi-point locking at the head and sill on both active and passive panels.
We quote each French and double door configuration individually because a 72-inch pair on a protected interior courtyard doesn’t have the same wind load as a 96-inch pair facing Biscayne Bay. The right DP rating is the one matched to the specific opening, not a blanket number stamped on every order.
Hurricane & Compliance Performance
Laminated Impact Glass
Every lite in these French and double doors carries a PVB (polyvinyl butyral) interlayer. When debris hits, the glass may crack, but the interlayer holds the fragments in place and keeps the building envelope sealed.
Miami-Dade NOA / Florida Product Approval
The door systems carry NOA and Florida Product Approval numbers issued per configuration. We verify the specific number that applies to your size, finish, and glass package when we prepare your quote.
FBC / HVHZ Compliance
The doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the stricter compliance track Miami-Dade and Broward enforce, and it’s the standard we build every quote around.
TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products in this category are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance.
Design Pressure for Your Wind Zone
Design pressures on these doors are matched to the wind zone of the specific Miami street where they’ll be installed, up to +/-100. We don’t oversell a higher rating than the opening needs, and we don’t undercut the code either.
Energy Performance
Low-E and insulated glass options are available where energy performance matters most, like west-facing doors in Kendall or doors on a second-floor landing that catches afternoon sun all summer.
Color & Glass Options
The finish palette for French and double doors in Miami leans toward what works with coastal and Mediterranean architecture. White and almond suit stucco exteriors and feel natural on most South Florida facades. Bronze and black read more contemporary and hold up visually against modern builds in areas like Edgewater or Coconut Grove. Tan is the quiet option when the door should blend into a neutral exterior rather than stand out.
On the glass side, clear laminated impact glass keeps sightlines clean and is the most common choice for interior-to-exterior openings where you want the view unimpeded. Tinted glass cuts glare on doors facing direct sun, which matters on east-facing patios in the morning or west-facing lanais in the afternoon. Low-E insulated glass adds a thermal break and works well on openings adjacent to air-conditioned rooms where heat gain is noticeable in July and August.
Installation by TruePane Windows & Doors in Miami
Installation is where an NOA-rated French door system either performs to its rating or becomes a very expensive liability. In Miami, we treat every opening as a wind zone question first and a design question second. Our process starts with a pre-install inspection of the rough opening, the surrounding wall condition, and the existing waterproofing. We check the opening dimensions against the door’s actual panel sizes before anything gets set.
We set every frame level, plumb, and square, which on older Miami homes with settled slabs and stucco walls sometimes means more shimming and correction than a homeowner expects. We install using AAMA 2400/2410 practice and seal the perimeter with AAMA 812 low-expansion foam, then finish with the appropriate sealant at the exterior face. After the door is anchored and the hardware is adjusted, we run a water test on the sill and threshold area, then walk the interior and exterior with you before calling the job done.
Permitting in HVHZ jurisdictions like Miami-Dade means the product approval submittal has to match the exact configuration on the permit drawings. We’re familiar with what building departments in Miami, Coral Gables, and the surrounding municipalities ask for, and we make sure the NOA number on your permit package matches the door we actually install. Improper installation compromises the NOA-rated system, and that’s the reason professional installation matters as much as the product itself.
Frequently Asked Questions - French & Double Doors
Design pressures are matched to the wind zone of your specific Miami location, up to +/-100. We calculate the required DP from the opening’s size, height above grade, and exposure category rather than applying a single rating to every door. Call (561) 956-2754 and we’ll confirm the rating for your exact address.
Lead times vary by manufacturer line and configuration, so we confirm the current schedule when we prepare your quote. Custom finishes, tinted or Low-E glass, and larger paired openings can extend the timeline compared to a stock clear-lite configuration.
Yes, in Miami-Dade and most neighboring municipalities the building department will ask for the product approval documentation that matches the door you’re installing. We provide the correct NOA and Florida Product Approval numbers per configuration on your quote so your permit package matches the actual product. Call (561) 956-2754 and we’ll walk you through what your jurisdiction requires.
Most configurations can be sized within the product’s maximum width of 96 inches. The exact range depends on the frame material and the manufacturer line, since not all lines offer the same panel width options. We’ll confirm what’s available in the line you’re considering before you commit to a design.
Wash the frames with mild soap and water, and avoid abrasive cleaners on powder-coated finishes. Check the sweep and threshold seal seasonally, since Miami’s sun and salt air wear weatherstripping faster than inland climates. The multi-point locking hardware should be kept free of debris and lubricated lightly at the manufacturer’s recommended intervals.
Get a Quote - French & Double Doors in Miami
Whether you’re replacing a sliding door with a true French pair in Pinecrest or adding double doors to a new build in Doral, we’ll spec the right configuration for your wind zone and your design. Call (561) 956-2754 to schedule a free on-site measurement or start a quote. We’ll bring the Miami-Dade NOA documentation for your configuration and walk you through the options line by line.
Written by the team at TruePane Windows & Doors, serving Miami, FL and surrounding communities with hurricane-impact window and door installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
